Smart door lock service with not only door open/close functions using smart phones, but also to set various door lock settings and manage entry/exit and warning history with applications.
Detail View
Z-Wave is a wireless communication model normally used in home IoT and in particular, it is a lower power module that can remotely control smart door lock devices in order to control smart door locks from long distances.
Detail View
When connecting HOMSSEN BLE and Wi-Fi bridge, you can freely control your smart door lock from a distance using the smartphone app (HOMSSEN App).
Detail View
| Blooth Version | Bluetooth Low Energy 5.0 | |
|---|---|---|
| Frequency | 40 Channels, 2MHz Wide | 2402~2480MHz |
| Signal Distance | Max 20m | |
| Multiple Access | FDMA and TDMA methods used both | |
| Power Consumption | within 15 mA | |
| Transmission speed | 1 Mbps | |
| Maximum Transmission Power | 10mW | |
| Operating Voltage | DC3.3V | |
| Operating Temperature | -25~60℃ | |
| Weight(Kg) | N/A | |
| Dimension(mm) | 24*16mm | |
| Antenna | Shorted Dipole Type PCB Antenna | |
| Storage Temperature | -40~80℃ | |
| App | Keywe(ios,Android) |
| Technical Foundation | No International Standard | |
|---|---|---|
| Founded Union | Z-Wave Alliance | |
| Transmission Distance | 40m | |
| Use of band | Sub 1G | |
| Modulation Technology | GFSK | |
| Node | 232 | |
| IC Provider | Sigma Design | |
| Power Consumption | Idle : ~1㎂, Rx : ~20㎃, Tx : ~40㎃ |
| Categories | Items | Specifications |
|---|---|---|
| Certification | RF certification | FCC/CE/IC/KCC/SRRC/NCC/TELEC |
| Green certification | RoHS/REACH | |
| Test | Reliablity | HTOL/HTSL/uHAST/TCT/ESD |
| Wi-Fi | Protocols | 802.11 b/g/n (802.11n up to 150 Mbps) |
| A-MPDU and A-MSDU aggregation and 0.4μs guardinterval support | ||
| Frequency range | 2.4 ~ 2.5 GHz | |
| Bluetooth | Protocols | Bluetooth v4.2 BR/EDR and BLE specification |
| Radio | NZIF receiver with –97 dBm sensitivity | |
| Class-1, class-2 and class-3 transmitter | ||
| AFH | ||
| Audio | CVSD and SBC | |
| Hardware | Module interfaces | SD card, UART, SPI, SDIO, I2C, LED PWM, Motor PWM,I2S, IR, pulse counter, GPIO, capacitive touch sensor,ADC, DAC |
| On-chip sensor | Hall sensor | |
| Integrated crystal | 40 MHz crystal | |
| Integrated SPI flash | 4 MB | |
| Operating voltage/Power supply | 2.7 V ~ 3.6 V | |
| Minimum current delivered bypower supply | 500 mA | |
| Operating temperature range | –40 °C ~ +85 °C |
